PT Arkamaya Guna Saharsa

Servo-Hydraulic Concrete Compression Test Machine Wall Type, 3000kN Capacity with Touch Screen Controller Frame:The test system is wall type rigid construction, 3000kN capacity, low friction single acting piston, 50mm piston stroke, comes with distance platens (2x50mm,1x70mm) to test different sizes of samples, upper platen spherically seated to allow an inclination of 3°, all transmission surfaces are additionally plane – parallel – treated and fine machined, feasible to test Cube samples (150x150x150mm, 200x200x200mm) Cylinder samples (100x200mm, 150x300mm, 160x320mm), Load Measurement: Load measurement with pressure transducer, high measurement accuracy, class 1 according to EN-ISO-7500-1 standard. Hydraulic Unit:Advanced hydraulic unit with Servo valve, multi piston hydraulic pump driven by electrical motor, smooth and high flow rate, fast piston approach, with manifold and pressure limit valve, oil tank, comes with necessary joints and hose. Control Unit: Control unit of machine is advanced EDC controller, control unit allows constant load increase adjustable between 0.5 kN/Sec – 25 kN/Sec,piston release load automatically at sample break,feasible for simple strength test – ramp loading, 1kHz data acquisition and control capability which allows (PID) control with double loop, automatic gain feature for different sensors, automatic calibration function. Display Unit:Display of machine is touch screen LCD with capacitive touch, easy to use - user friendly built-in software, ready to use without any PC, internal memory to save test graphics and settings, USB port to transfer results from LCD, LAN port to connect machine with internet and PC, save results in pdf and excel format, print result feature directly from LCD (optional), software update feature, all possible measuring units are available (N, kN, kg etc.), automatic zero point correction, high control stability, password protected calibration menu, password protected user levels to avoid change in settings by operator. Automatic Pressure Unit for Lateral Pressure in Hoek Triaxial Cell for Automatic Uniaxial &Triaxial Testing The PRO-045.PT Automatic Pressure Unit is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.5 bar. Pressure is controlled by using the closed loop PID controlled EDC electronic control unit. User can define and control the lateral pressure through the advanced testing software. Include: - LVDT, 10mm Measuring Range - Compressometer for 150x300mm cylinder samples for E-modulus and Poisson ratio measurement - Strain Gauge, 10mm Measuring Range - Hoek Triaxial Cell NX (54.74 mm dia.) - Spare Sealing Sleeves, HQ (63,5 mm dia.) for Hoek Triaxial Cell (Membrane)