PT Arkamaya Guna Saharsa

4-column rigid construction, columns are screwed to upper and lower blocks free from play, 3000kN compression and 150kN Bending capacity, low friction single acting piston, 60mm piston stroke for compression side, 120mm piston stroke for bending side. comply with EN-12390-4 standard, comes with distance platens (2x50mm,1x70mm) to test different sizes of samples, upper platen spherically seated to allow an inclination of 3°, all transmission surfaces are additionally plane – parallel – treated and fine machined, feasible to test cube samples (150x150x150mm, 200x200x200mm) cylinder samples (100x200mm, 150x300mm), maximum compression daylight is 330mm. Feasible to test 150x150x600 and 100x100x400/500 beam samples, max. bending daylight is 160mm. Load Measurement: The load measurement and control is carried out between 2% and 100% of the capacity with class 1 or better accuracy due to the accurate load measurement system according to EN-ISO-7500-1 standard. Hydraulic Unit: Advanced hydraulic unit with multi piston hydraulic pump driven by electrical motor, smooth and high flow rate, fast piston approach, with manifold and pressure limit valve, oil tank, comes with necessary joints and hose. Control Unit: Control unit of machine is “Sematron Touch V2” advanced controller, control unit allows constant load increase adjustable between 0.5 kN/Sec – 25kN/Sec, piston release load automatically at sample break, feasible for simple strength test – ramp loading –, 1kHz data acquisition and control capability which allows accuracy in control and reading load, special close loop (PID) control with double loop, automatic gain feature for different sensors, automatic calibration function, extra channel for a 2nd load sensor. Display Unit: Display of machine is 7inch touch screen LCD with capacitive touch, easy to use - user friendly built-in software, ready to use without any PC, 4 GB (extendable) internal memory to save test graphics and settings, USB port to transfer results from LCD, LAN port to connect machine with internet and PC, communication between control unit (Sematron Touch V2) by CAN-bus, save results in pdf and excel format, print result feature directly from LCD – feasible to attach all HP printers also allows mini printer (optional), Email results directly from LCD, software update feature by USB, all possible measuring units are available (N, kN, kip etc.), automatic zero point correction, high control stability, password protected calibration menu, password protected user levels to avoid change in settings by operator.